This Custom 36” X 80” Honduran Mahogany true divided light (TDL) door with beveled glass and two 24” X 80” custom true divided light sidelites with beveled glass is installed on a Dental Office in Enterprise, Alabama. The transom is custom extended leg segment top true divided light with beveled glass. The hardware shown is a Baldwin Push/Pull plate and deadbolt.
These massive 10 ft. doors were custom designed and built of Mesquite wood for The Gaylord Opryland Resort and Convention Center of Texas. Mesquite wood was chosen because it is native to Texas. Finding the wood to build doors this size was a real challenge since Mesquite is closer to a bush than a tree! You can see these doors in Grapevine, Texas. Grapevine is a suburb of Dallas.
This 36" X 96" Honduran Mahogany Style E-2 Door was built to accommodate a mail slot and has a custom Iron Grill on the outside. It has our standard raised molding on both sides. This door can be found as the entrance to Cucos Restaurant located in a quaint shopping area in downtown Montgomery, Alabama. The hardware and mail slot are Baldwin.
These massive entry was custom designed and built of Mahogany for the St. John Square Office Building in the Old St. John Square Historical District in Covington, Louisaina. Click to see the Rear Door Style DbyD-6011. This Entry was stained and finished by Doors By Decora using English Chestnut Stain. The doors and sidelites have clear tempered insulated glass and custom designed wrought iron grills. The hardware is Baldwin Edinburgh 6952-112.
This entry was designed to be the focal point for the offices and training facility for a computer software vendor in Montgomery, Alabama. The Entry is built of Mahogany and consists of a 36" X 84" 3 lite door with raised molding on both sides, a pair of 20" 3 lite sidelites and a 4 lite wrap around transom. The glass is tempered insulated beveled glass with the street address on the center transom. The entry was designed, built, finished and installed by Doors By Decora. The hardware is Baldwin Madison in Oil Rubbed Bronze.
When a group of businessmen got together to form a new bank in Monroeville, Alabama the state banking commissioner suggested that they contact us to do the front door for their new bank. We designed the logo for the door and they used it for the banks logo. First Citizens Bank's grand opening was announced in the local paper with the president holding the door open to show off the doors that they were so proud of. The glass is Leaded Beveled and textured glass and the blue is "Flashed Glass" with the lettering engraved in it.
One 36" X 80" Mahogany E-R door with two rosettes, keystone and ledge and dentil on the exterior and our standard raised molding on the interior. The glass is Leaded Beveled and Textured Glass with the company Logo leaded in the center. We also designed, built and installed 4 Leaded Beveled and Textured Radius Transoms to go over the Glass Block Windows on the front of this building.
One 36" X 80" Honduran Mahogany E-B door with two rosettes, keystone and ledge and dentil on the exterior and our standard raised molding on the interior. The glass is tempered beveled glass. The entryway includes two 14" x 80" E-B sidelites with tempered beveled glass. The transom is a 16" rectangular transom with tempered beveled glass. The hardware is a commercial grade lever and a Baldwin deadbolt with a kickplate.
One 36" X 96" Honduran Mahogany custom three lite true divided light door with tempered beveled glass. Two 24" X 96" three lite custom sidelites with tempered beveled glass. The 24" rectangular transom has tempered beveled glass. The hardware is a Baldwin pull and a deadbolt. This poplar unit is on a dentist office in Montgomery, Alabama.
These two 36" X 96" Honduran Mahogany solid six panel doors with raised molding and two 12" x 96" Honduran Mahogany one lite over one panel sidelites with clear tempered glass are installed on the A. G. Edwards office in Montgomery, Alabama. The hardware is a Baldwin push/pull plate and deadbolt.
This 36" X 80" Mahogany A-2 Door with Fluted Molding, Rosettes, Ledge and Dentil Molding was designed, built and installed on an old home in downtown Montgomery for the offices of the Alabama Sheriffs Association. The glass is Leaded Textured and Stained Glass with the logo for the association. The hardware is a Baldwin Brass Springfield.
This pair of 36" X 80" Custom Spanish Cedar "E" Doors with our standard raised molding are flanked on both sides by matching 12" Sidelites has a 3 piece 12" Transom above the entry all with Leaded Clear Insulated Beveled Glass. This entry was stained and finished with cherry stain. This Entry can be seen on the front of the Ross Clayton Funeral home in Montgomery, Alabama. Below is a picture of one of the Leaded beveled and Stained Glass Windows that we designed and built for their Chapel.
This "Port Hole" exterior door is on display in our showroom in Montgomery, Alabama. This 42" X 96" Contemporary Door was built of Knotty Alder. The Port Hole is solid brass and could actually be used in a ship. Hannah Rene Jones is doing a "Quality Inspection". She is the 2 year old daughter of J.K. Jones, our Vice President of Marketing.
This pair of 36" X 80" exterior commercial doors make a "Quality Statement" on the front of this auto repair shop. The mahogany doors feature one lite over one V-Grove raised panel. The glass is insulated tempered glass featuring the logo of the business. The doors are finished using a traditional mahogany stain and the hardware is ?????.
Pictured is the entrance to Hayes Funeral Home in Elba, Alabama that was designed, built, finished and installed by Doors By Decora. This elegant entry consists of a pair of 36" X 84" C-2 Doors with custom Leaded Beveled Glass and a matching Radius Transom flanked on each side by a 30" X 96" radius top fixed door. This entry gives a warm comfortable setting for family visitations and the gathering of friends and family before a funeral.
Need an answer about what we carry? We're happy to assist you. Call (866) 845-5683